IATF 16949 NBR Rubber Sheet Abrasion Resistance Nitrile Butadiene Rubber
IATF 16949 NBR Rubber Sheet Abrasion Resistance Nitrile Butadiene Rubber
Product Summary
MC6025 NBR Foamed Rubber-Coated Metal offers high wear, oil, and fuel resistance with a steel core for superior sealing. It conforms to rough surfaces and requires low clamp load. Available in black or red, with custom options.
Product Details
Highlight:
iatf 16949 nbr rubber sheet
,nbr rubber sheet abrasion resistance
,abrasion resistance nitrile butadiene rubber
Chemical Resistance:
Oil, Fuel Resistant
Durability:
High Wear And Abrasion Resistance
Color:
Black, Red Available Upon Request
Coating Material:
Nitrile Butadiene Rubber (NBR)
Basemetal:
Low Carbon Steel- SPCC
Material type:
Metal With NBR Coating
Applications:
Sealing, Gaskets, Protective Linings
Temperature Resistance:
-40°C To 120°C
Tensile Strength:
High (specific Value Depends On Base Metal)
Productname:
NBR Foamed Rubber-Coated Metal (RCM)
Hardness:
55 - 65 Shore A
Coil Width:
890mm
Product Description
Product Overview
The MC6025 is an advanced composite sealing material engineered through a specialized process that evenly coats a Nitrile Butadiene Rubber (NBR) layer onto a robust metal steel core. This innovative design combines the mechanical strength of steel with the unique elastic properties of NBR, creating a versatile gasket solution for demanding industrial applications.
Key Features & Benefits
- Enhanced Conformance to Rough Surfaces: Unlike traditional rubber-coated or soft metal gaskets, the NBR layer delivers a significantly higher degree of surface conformance. It effectively fills surface irregularities, scratches, and imperfections commonly found on worn or rough sealing flanges, eliminating the need for expensive surface refinishing and ensuring a leak-tight seal even on suboptimal substrates.
- Low Clamp Load Requirement: Thanks to the compliant nature of the NBR coating, the material achieves an effective seal with substantially lower bolt torque or clamp loads compared to conventional steel or high-density gaskets. This reduces stress on flange bolts, minimizes the risk of flange deformation, and simplifies installation—particularly in lightweight equipment or applications with limited access.
Technical Specifications
| Property | Specification |
|---|---|
| Rubber Type | Foamed NBR |
| Base Metal Type | SPCC |
| Surface Appearance | Semi-luster black |
| Overall Thickness (mm) | 0.60 ± 0.15 |
| Base Metal Thickness (mm) | 0.25 ± 0.01 |
| Base Metal Hardness (HV) | 115–150 |
| Rubber Coating Thickness (mm) | 0.175 ± 0.070 (per side) |
| Max. Operation Temperature (°C) | ≤ 150 °C |
| Rating Adhesion Test (ASTM-D3359) | 100% Residual |
| Pull Off Test (MPa) (ASTM-D4541-09) | ≥ 1.0 |
| Compressibility (%) (ASTM F-36) | ≥ 20 |
| Recovery (%) (ASTM F-36) | ≥ 45 |
| Creep Relaxation Rate (%) (ASTM F-38) | ≤ 20 |
| Unaged Physicals | |
| Shore A Durometer (Points) (ASTM D-2240) | 55–65 |
| Tensile Strength (MPa, Min.) (ASTM D-412) | ≥ 8 |
| Ultimate Elongation (%, Min.) (ASTM D-412) | ≥ 200 |
| Heat Aged (70 hrs @ 100 °C) | |
| Change in Durometer Hardness (Points) (ASTM D-573) | −15 to +15 |
| Change in Tensile Strength (%, Max.) (ASTM D-573) | −30 to +30 |
| Change in Ultimate Elongation (%) (ASTM D-573) | ≥ −50 |
| Compression Set (%) (ASTM D-395, 100 °C * 22 h) | ≤ 25 |
| Volume Change (%, Max.) — Oil IRM 903 (ASTM D-471) | ≤ 20 |