NBR Foamed Rubber Coated Metal SPCC RCM Nitrile Gasket Material Sheet
NBR Foamed Rubber Coated Metal SPCC RCM Nitrile Gasket Material Sheet
Product Summary
BN2520 NBR-coated stainless steel offers superior oil/fuel resistance, high durability, and strong metal-rubber adhesion. Withstands -40°C to 120°C, ideal for demanding sealing and gasket applications requiring extended service life.
Product Details
Highlight:
NBR Foamed Rubber Coated Metal RCM
,SPCC RCM Nitrile Gasket Material Sheet
,Rubber Coated Metal SPCC RCM
Chemical Resistance:
Oil, Fuel Resistant
Durability:
High Wear And Abrasion Resistance
Color:
Black, Red Available Upon Request
Coating Material:
Nitrile Butadiene Rubber (NBR)
Basemetal:
Low Carbon Steel- SPCC
Material type:
Metal With NBR Coating
Applications:
Sealing, Gaskets, Protective Linings
Temperature Resistance:
-40°C To 120°C
Tensile Strength:
High (specific Value Depends On Base Metal)
Productname:
NBR Foamed Rubber-Coated Metal (RCM)
Hardness:
55 - 65 Shore A
Coil Width:
890mm
Product Description
NBR Foamed Rubber-Coated Metal (RCM)
MC6020 Rubber Coated Metal
The MC6020 is an advanced composite sealing material, engineered through a specialized process that evenly coats a Nitrile Butadiene Rubber (NBR) layer onto a robust metal steel core. This innovative design combines the mechanical strength of steel with the unique elastic properties of NBR, creating a versatile gasket solution for demanding industrial applications.
Key Features & Benefits
- Enhanced Conformance to Rough Surfaces: Unlike traditional rubber-coated or soft metal gaskets, the NBR layer on the MC6020 delivers a significantly higher degree of surface conformance. It effectively fills surface irregularities, scratches, and imperfections commonly found on worn or rough sealing flanges, eliminating the need for expensive surface refinishing and ensuring a leak-tight seal even on suboptimal substrates.
- Low Clamp Load Requirement: Thanks to the compliant nature of the NBR coating, the MC6020 achieves an effective seal with substantially lower bolt torque or clamp loads compared to conventional steel or high-density gaskets. This reduces stress on flange bolts, minimizes the risk of flange deformation, and simplifies installation—particularly in lightweight equipment or applications with limited access.
Technical Specifications
| Property | Specification | |
| Rubber Type | Foamed NBR | |
| Base Metal Type | SPCC | |
| Surface Appearance | Semi-luster black | |
| Overall Thickness (mm) | 0.60±0.15 | |
| Base Matel Thickness(mm) | 0.20±0.01 | |
| Base Metal Hardness (HV) | 115-150 | |
| Rubber Coating Thickness(mm) | 0.20±0.07(per side) | |
| Max . Operation Temp (℃) | ≤150℃ | |
| Rating Adhesion Test ASTM-D3359 | 100% Residual | |
| Pull Off Test (Mpa) ASTM-D4541-09 | ≥1.0 | |
| Compressibility (%) ASTM F-36 | ≥20 | |
| Recovery (%) ASTM F-36 | ≥45 | |
| Creep relaxation rate (%) ASTM F-38 | ≤20 | |
| Unaged Physicals |
Shore A duromete (Points) ASTM D-2240 |
55~65 |
| Tensile Strength Mpa (Min.) ASTM D-412 | ≥8 | |
| Ultimate Elongatoin ( % min) ASTM D-412 |
≥200 | |
| Heat Aged (70 hrs@100℃) |
Change in Durometer hardness (Points) ASTM D-573 |
—15~15 |
| Change in Tensile Strength ( % max. ) ASTM D-573 | —30~30 | |
| Limit elongation change (%) ASTM D-573 | ≥-50 | |
| Compression permanent deformation(%) ASTM D 395,100℃x22h |
≤25 | |
| Volume Change (% max.) Oil IRM 903, ASTM D-471 |
≤20 | |