فلز پوشش داده شده مواد FKM RCM فولاد ضد زنگ 301 مواد لاستیکی FKM
فلز پوشش داده شده مواد FKM RCM فولاد ضد زنگ 301 مواد لاستیکی FKM
خلاصه محصول
فولاد ضد زنگ SUS301 با روکش FKM مقاومت بالایی در برابر خوردگی، روغن و حرارت (40- تا 250 درجه سانتی گراد) ارائه می دهد. ایده آل برای آب بندی فشار بالا، واشر، و پوشش های محافظ با دوام بیشتر و چسبندگی فلز-لاستیک قوی.
جزئیات محصول
برجسته کردن:
فلز پوشش داده شده مواد FKM
,مواد FKM RCM
,فولاد ضد زنگ 301 مواد لاستیکی FKM
Chemical Resistance:
روغن، مقاوم در برابر سوخت
Durability:
مقاومت در برابر سایش و سایش بالا
Color:
مشکی، قرمز در صورت درخواست موجود است
Surface Finish:
صاف، ضد خوردگی
Material Type:
FKM (فلورالاستومر) پوشش داده شده فلز
Base Material:
فولاد ضد زنگ SUS301
Temperature Resistance:
-40 تا 250 درجه سانتی گراد
Typical Applications:
واشر سر سیلندر - MLS، آب بندی برای عبور روغن و خنک کننده
Mechanical Strength:
استحکام مکانیکی افزایش یافته از هسته فلزی
Max. Sheet Size:
500mm x 1050mm
توضیحات محصول
BF2520 FKM Coated Metal Material
RCM stainless steel 301 substrate with uniform FKM rubber coating ensuring corrosion resistance
Product Overview
BF2520 Rubber Coated Metal is produced using stainless steel 301 as the metal substrate. Through a specialized production process, a uniform FKM rubber coating is applied onto both sides of the substrate.
This material offers excellent heat resistance, long-term durability, and very low compression set. Compared with traditional non-metallic sealing materials, it provides a significantly longer service life. It is typically used in applications requiring higher pressure, higher temperature, and more stringent sealing performance.
Technical Specifications
| Property | Specification |
|---|---|
| Rubber Type | FKM |
| Base Metal Type | SUS301 |
| Surface Appearance | Semi-luster black |
| Overall Thickness (mm) | 0.25±0.02 |
| Base Metal Thickness (mm) | 0.20±0.01 |
| Rubber Coating Thickness (mm) | 0.025±0.005 (Per side) |
| Max. Short-term Operation Temp (℃) | ≤250℃ |
| Rating Adhesion Test ASTM-D3359 | 100% residual |
| Pull Off Test (Mpa) ASTM-D4541-09 | ≥1.4 |
| Base Metal Hardness (HV) | 430 ~ 470 |
| Unaged Physicals - Shore A durometer (Points) ASTM D-2240 | 75 ~ 85 |
| Unaged Physicals - Tensile Strength Mpa (Min.) ASTM D-412 | ≥8 |
| Unaged Physicals - Ultimate Elongation (% min) ASTM D-412 | ≥175 |
| Heat Aged (70 hrs@100℃) - Change in Durometer hardness (Points) ASTM D-573 | -15 ~ 15 |
| Heat Aged (70 hrs@100℃) - Change in Tensile Strength (% max.) ASTM D-573 | -30 ~ 30 |
| Heat Aged (70 hrs@100℃) - Volume Change (% max.) Oil IRM 903, ASTM D-471 | ≤20 |